Rata RP 20 / 40 / 70 TA Daten

[carawu]

Moin,

mir liegen folgende Daten zu diesen Tonabnehmern (Russ Andrews TA) vor.
Sind diese Angaben korrekt? 

LG Carsten

PS: In der TA Galerie gibt es ein paar schöne Bilder....

--------------------------------------------------------------------------------

RATA  RP 40
Technical Specifications:

Frequency Response -         20 Hz-18 kHz , 3 dB
Cahnnel Balance-                  2 dB @ 1 kHz
Channel Separation-            20 dB @ 1 kHz
Sensitivity-                              5.5 mV , 1.5 dB @ 1 kHz at 5 cm/sec
Static Compliance-               20 cu
Equivalent Tip Mass-           0.7 mg
Verticle Tracking Angle-      26 degrees
Stylus Radius-                       .0007 in x .0003 in
Playing Weight-                     1.75 gm maximum
--------------------------------------------------------------------------------

Russ Andrews RP 20 Moving Magnet Cartridge

Technical Specifications:

Frequency Response -         20 Hz-18 kHz , 3 dB
Cahnnel Balance-                  1 dB @ 1 kHz
Channel Separation-            25 dB @ 1 kHz
Sensitivity-                              4.5 mV , 1.5 dB @ 1 kHz at 5 cm/sec
Static Compliance-               16 cu
Equivalent Tip Mass-           0.7 mg
Verticle Tracking Angle-      26 degrees
Stylus Radius-                       .0007 in x .0003 in
Playing Weight-                     1.75 gm maximum
--------------------------------------------------------------------------------

RATA  RP Series RP 70

Technical Specifications:

Frequency Response -         20 Hz-18 kHz , 3 dB
Cahnnel Balance-                  2 dB @ 1 kHz
Channel Separation-            20 dB @ 1 kHz
Sensitivity-                              5.5 mV , 1.5 dB @ 1 kHz at 5 cm/sec
Static Compliance-               20 cu
Equivalent Tip Mass-           0.7 mg
Verticle Tracking Angle-      26 degrees
Stylus Radius-                       .0007 in x .0003 in
Playing Weight-                     1.75 gm maximum